In the ’60s and ’70s, popcorn ceilings were highly trendy since the texture was considered an easy technique to disguise faults in drywall and plaster ceilings; also, these ceilings didn’t need painting afterward. However, their rough texture collects a lot of dust and cobwebs and makes it hard to clean. If there are cracks or holes, it can be real trouble to deal with. So, in today’s post, we’ll see a few pointers to make popcorn ceiling removal a little easier for you. By the way, if you need an even easier way, you can try the services for popcorn ceiling removal by Patch Dudes.
Perform a Scrape Test
First, try to scrape a tiny patch before you go to all the effort of prepping the room. Try it dry and then dampen it with water to try once again. Some textures can be removed without water, although soaking is recommended in most circumstances. If the water does not soak into the texture and soften it, the ceiling has most likely been painted, or paint was mixed into the texture mix. Soaking the ceiling might not assist in this scenario. You will have to decide if you can handle a difficult scraping task or find another means to conceal it, such as trying popcorn ceiling removal by Patch Dudes. The other prep steps include the following:
- Asbestos Testing
- Preparation mess
- Remove all furniture
- Remove ceiling fixtures, fans, and lights
- Cover electrical boxes and switches
Work on Small Areas
Spray and scrape only a little patch at a time. You can select approximately 2 x 2 feet. If you work on a bigger patch in one go, the popcorn may dry out before you can scrape it off. If this occurs, you will need to re-spray the patch and again wait for ten or more minutes before the patch is ready to be scrapped.
Using a Mud Pan, Control the Mess
You can catch the wet popcorn with a mud pan (the type used to contain joint compound) before it falls onto the floor. Also, you won’t be tracking it all over the place when you need to move. When your scraper becomes clogged, use the pan’s edge to wipe it off.
Avoid Gouging
Round the corners of the popcorn scraper, no matter what type of scraper you have. Doing this will help you prevent gouging the ceiling. This can be done with a file, a sander, or an electric grinder.
Ensure Smooth Surface After scraping
You will not get a paint-ready ceiling only by scraping. There are still some little dings and gouges that will almost certainly need to be repaired. Therefore, before you paint the ceiling, you will need to sand it in order to make it a perfectly smooth and paint-ready surface.
Take Professional Help
Removing popcorn ceiling is indeed a time-consuming task, so ensure that you have enough time to dedicate to complete this job. If you don’t have enough time or you are not ready to do it on your own, then it is advisable that you opt for popcorn ceiling removal by Patch Dudes. These guys have a well-trained team. Every member on their team goes through rigorous training for two months before taking up a professional job. Thus, they offer and maintain high-quality and reliable popcorn ceiling removal services.
I hope these tips will help you. Please, do lets us know of your experience in the comments section and share this blog with your friends and family.
