It is advisable to clean the windows with certain frequency, especially on humid and not hot days, or early in summer, so that the liquid applied can work well. To clean the winders, you can apply the liquid along the entire surface of the glass and let it act for a few minutes on it so as to loosen the dirt that is adhered. Then it should be cleared, always starting at the top.
If the blower of the glazing kit is used, the rubber band, the part that comes into contact with the surface of the glass, must be dried after each pass. If, on the other hand, a cloth is used, it must be drained on each occasion. It is advisable not to clean the glass on a sunny day, as the liquid will dry very quickly and will not work well.
In case paper is used, its own state and the results that will indicate when it should be discarded and use another. When using newsprint, the ink will stain your hands a lot when cleaning, but the glass will look great. And when washing hands, the ink is cleaned quite easily.
An important fact is that, contrary to what it may seem, the moments of full sun or in which there is a dry and pleasant wind, they are the worst days to have effective cleaning of the windows for the reason that these conditions cause the liquid to dry very fast and do not get to loosen properly the adhering dirt. Therefore, it is advisable to clean on a humid and not so hot day and, in the summer, early in the morning.
If you intend to use the natural products to create the window cleaning mixture, it can be made with a liter of water and six tablespoons of vinegar and a dash of dishwashing detergent, and you can add the juice of a lemon. Also the cornstarch, dissolved in the resulting liquid, provides cleaning properties. In all cases, it is recommended that the water is warm but not hot.
To clean the frames of windows, the most important thing to keep in mind is to use a cleaning substance according to the material of which they are built. If they are of aluminum or some other metal, the ideal thing is to use water with a little alcohol. For PVC frames or other synthetic materials, it is better to use water and white soap, or dishwasher detergent if they are very dirty. In case of wood, it is advisable to take care of it with a specific product such as a cleaning liquid for wooden floor.